Hi All,
I have just setup a new WLAN using 5508 controllers (located in our HQ) and 3602I APs located in the branches configured in Flexconnect mode.
I created a basic WLAN with WPA2/AES/802.1X and wireless clients are seeing high latecny of 200ms and packet loss, this happens on both 2.4 and 5 with and without wireless N enabled. No significant interferance being reported on the APs or by cleanair. This happens on a range of wireless client devices and wireless adapters.
After lots of testing I noticed that disabling WMM on the WLAN dramatically reduces latency down to 2-3ms. Has anyone seen this behaviour before with 3602I clean air aps?
