I bought a pair of SG200-08 switches a month ago and noticed that after a couple of weeks (give or take) the web interface stops responding (today being the 2nd time this happened). I am on v1.0.5.1 of the firmware on both switches.
I can ping the switches just fine. I've run a port scan against then showing that port 80 is open. When I browse to either switch using IE9.0 or Chrome (v21) both show page loading however it remains blank - eventually the browser times out. I've tried multiple machines (just in case of port blocking) however always the same result.
To correct this I power cycle the switches and the web interface starts working.
On the switching side, both seem to be working as there doesn't isn't any network impact (from what I can tell) however not being able to access the web interface is very irritating, not to mention making me wonder what else isn't working...
Any suggestions welcome.
Ian
