12-31-2012 04:42 AM
Hello,
A particular VPN user is getting the below error while he try to connect using Cisco vpn client (version 5.0).
Secure VPN connection terminated locally by the Client
Reason 412: The remote peer is no longer responding.
I tried to connect VPN using the same profile and it was working fine. Other VPN users can also connect without any issue.
Below are the logs that I am getting from the VPN client:
82 02:02:14.445 12/31/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG (Retransmission) to x.x.x.x
83 02:02:19.593 12/31/12 Sev=Info/4 IKE/0x63000021
Retransmitting last packet!
84 02:02:19.593 12/31/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG (Retransmission) to x.x.x.x
85 02:02:24.710 12/31/12 Sev=Info/4 IKE/0x63000021
Retransmitting last packet!
86 02:02:24.710 12/31/12 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG (Retransmission) to x.x.x.x
87 02:02:29.858 12/31/12 Sev=Info/4 IKE/0x63000017
Marking IKE SA for deletion (I_Cookie=CC3B6AF2C2BD2FCA R_Cookie=0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING
88 02:02:30.373 12/31/12 Sev=Info/4 IKE/0x6300004B
Discarding IKE SA negotiation (I_Cookie=CC3B6AF2C2BD2FCA R_Cookie=0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING
89 02:02:30.373 12/31/12 Sev=Info/4 CM/0x63100014
Unable to establish Phase 1 SA with server "x.x.x.x" because of "DEL_REASON_PEER_NOT_RESPONDING"
90 02:02:30.373 12/31/12 Sev=Info/5 CM/0x63100025
Initializing CVPNDrv
91 02:02:30.373 12/31/12 Sev=Info/6 CM/0x63100046
Set tunnel established flag in registry to 0.
92 02:02:30.373 12/31/12 Sev=Info/4 IKE/0x63000001
IKE received signal to terminate VPN connection
93 02:02:31.387 12/31/12 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
94 02:02:31.387 12/31/12 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
95 02:02:31.387 12/31/12 Sev=Info/4 IPSEC/0x63700014
Deleted all keys
96 02:02:31.387 12/31/12 Sev=Info/4 IPSEC/0x6370000A
IPSec driver successfully stopped
I tried to disable firewall, reinstall vpn client software and followed few links like http://www.lamnk.com/blog/vpn/cisco-vpn-client-reason-412-the-remote-peer-is-no-longer-responding/ but didn't find a poosible solution.
The Cisco VPN Client(x64) is installed on Server2008 Ent (x64). Please help me on this issue.
Regards,
Tony