Hi,
We are running Cisco 6509-e and we are running load test and when traffic reach 80 mbps switch start reponding very slow. I checked CPU usage and it was using 100% and connection to the switch from outside to inside are 80K. once connection dropp Cisco release CUP and it start responding normal.
CPU utilization for five seconds: 99%/17%; one minute: 84%; five minutes: 74%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
IP NAT Ager using very high CPU.
I am running
sup-bootflash:s72033-ipservicesk9-mz.122-33.SXH8.bin
Regards,
HM
