03-15-2013 04:06 AM - edited 07-03-2021 11:44 PM
Hi,
I have problem with my WLC2504. My WLC is connected through two ports (1 and 2 of four) to my distro switch, where I have dot1q trunks configured. WLC is configured with Management interface (IP address 192.168.255.9/24), over which my LAPs are correctly joined. However, once I'm trying to add additional Dynamic WLC interface, which has VLAN TAG 10 and which I'd like to associate with my WLANS, my WLC stop responding through GUI and SSH, but pings on the management and dynamic interface IP addresses are sucesfull. Just as a note, dynamic AP management is not enabled on mentioned dynamic interface. In a case when I enable dynamic AP management on the dynamic interface (activated also on management interface), GUI and SSH work, but I can not associated WLAN to the dynamic interface, only to the management one
Thanks for soon answer
palo73
Solved! Go to Solution.