03-10-2013 11:19 AM
I'm trying to telnet into the my RV180 router. How do I go about it.
I created 3 VLANS
1 at 192.168.1.1
20 at 192.168.20.1
30 at 192.168.30.1
Here is the Multiple VLAN Subnet Table:
1 | 192.168.1.1 | 255.255.255.0 | DHCP Server | Enabled | ||
10 | 192.168.10.1 | 255.255.255.0 | DHCP Server | Enabled | ||
20 | 192.168.20.1 | 255.255.255.0 | DHCP Server | Enabled |
I can ping the router at all 3 IP addresses.
How do I enable the telnet service on the router?
Solved! Go to Solution.