cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Who Me Too'd this topic

tftpdnld

HI

I am having some problem with 1841 router. I deleted its image and now tying to download it from TFTP in rommon.  I am getting these messages.

Readonly ROMMON initialized

rommon 1 > IP_ADDRESS=192.168.1.3

rommon 2 > IP_SUBNET_MASK=255.255.255.0

rommon 3 > DEFAULT_GATEWAY=192.168.1.1

rommon 4 > TFTP_SERVER=192.168.1.10

rommon 5 > TFTP_FILE=c1841-advipservicesk9-mz.124-11.t

rommon 6 > tftpdnld

          IP_ADDRESS: 192.168.1.3

      IP_SUBNET_MASK: 255.255.255.0

     DEFAULT_GATEWAY: 192.168.1.1

         TFTP_SERVER: 192.168.1.10

           TFTP_FILE: c1841-advipservicesk9-mz.124-11.t

        TFTP_MACADDR: 00:16:c8:8e:b0:88

        TFTP_VERBOSE: Progress

    TFTP_RETRY_COUNT: 18

        TFTP_TIMEOUT: 7200

       TFTP_CHECKSUM: Yes

             FE_PORT: 0

       FE_SPEED_MODE: Auto Detect

Invoke this command for disaster recovery only.

WARNING: all existing data in all partitions on flash will be lost!

Do you wish to continue? y/n:  [n]: 

TFTP download aborted - user request

I also used a cross over cable and straight through cable while disable the windows7 firewall but not sucess. I am connecting through router console to my laptop. and laptop has a TFTP sever I belive in my case TFTP server ip address and my laptop ip add must be same?. Now question is do i need to give ip address, subnet mask and default gatway address to my laptop Network card?

please hlep

Regards,

please do not forget to rate.
Who Me Too'd this topic