06-25-2013 08:02 AM - edited 03-07-2019 02:04 PM
Hi all,
Could you please help me with these DHCP Rate Limit queries ?
1. Does DHCP Rate Limit Err-Disabled detection gets enabled automatically when IP DHCP Snooping is enabled globally ?
2. What is default rate after which the port go to Err-Disbaled if no custom dhcp rate limit is set on the interface ?
Is there a recommended limit ?
3. There have been conitnous DHCP Rate Limit Err- Disabled alerts from ports on the Switches in the infrastructure , from most of the access switches in the infrastructure. The rate is set at 10 on every switch interface. What can be the sudden reason of receiveing DHCP packets from every Access port ?
Can it be due to connectivity issues to DHCP Server and the clients are constantly trying to find the DHCP Server using Discover ?
Please help !
Anup
Solved! Go to Solution.