Hi everyone im looking for help while using the GUI in packet tracer, here is my network.
http://imageshack.us/photo/my-images/10/fresz.png/
I have 2 routers which are on subnetted networks. I just want help with these 2 routers at the moment even though i have a total of 5 subnetworks.
3 routers and 2 serial cables between them = 5 networks.
Router 1's network addresses is 172.30.41.0/24.
The serial cable has an address of 172.30.42.0./24 and the 3rd router has and network address of 172.30.43.0/24.
They all have a subnet mask of 255.255.255.0.
My problem is when i give the router 1 an ip address of 172.30.41.3
I give the serial cable an address of 172.30.42.253 and 254 for the other end of the serial connecting to router no 2.
PC 0 has an ip address of 172.30.40.1.
When i try to ping in packet tracer from pc0 to router 2 it fails.
I have tried entering this in router 1's static configuration gui which i think is correct yet it still fails to ping.
[IMG]http://imageshack.us/a/img834/9163/fdfergfergf.png[/IMG]
I have the default gateway set as 172.30.41.3 which is the same as the ip address as router 1....
Can somebody show me where im going wrong please ive been at this for 4 hrs now....
