hi guys
I upgraded my SG500 switch firmware to 1.3.0.59, since there is a new functionality DHCP server v.4
well I must say I came accross the issue I cannot solve. DHCP server assign dynamic address - no hassles.
troubles start with static IP hosts.
I defined a couple of hosts with static address within the correct subnet. I tried with hardware address and client identifiers. no luck. my switch does not assign the IP address I assigned to the suitable mac address. to define it I use both CLI & Web.
no of them works. any idea ?
below the cut from my config:
ip dhcp pool host HP-Ellite
address 10.10.11.7 255.255.255.0 client-identifier 01:d8:d3:85:cf:09:72
client-name HP-Ellite
default-router 10.10.11.1
exit
ip dhcp pool host VAIO-Z
address 10.10.14.108 255.255.255.0 hardware-address 54:53:ed:1c:a1:46
default-router 10.10.14.1
exit
