Who Me Too'd this topic

Hi,

Have some old 2501 routers to practice. On two of them afer bootup he sais 'Press RETURN to get started'. But after hitting return this doesn't do anything???? Any possible cause or how to fix this?

System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE

Copyright (c) 1986-1995 by cisco Systems

2500 processor with 4096 Kbytes of main memory

F3: 4018148+53544+224688 at 0x3000060

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

Cisco Internetwork Operating System Software

IOS (tm) 2500 Software (C2500-I-L), Version 11.2(2), RELEASE SOFTWARE (fc1)

Copyright (c) 1986-1996 by cisco Systems, Inc.

Compiled Wed 13-Nov-96 07:37 by ajchopra

Image text-base: 0x030217A4, data-base: 0x00001000

cisco 2500 (68030) processor (revision A) with 4096K/2048K bytes of memory.

Processor board ID 01088436, with hardware revision 00000000

Bridging so

X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.

1 Ethernet/IEEE 802.3 interface(s)

2 Serial network interface(s)

32K bytes of non-volatile configuration memory.

8192K bytes of processor board System flash (Read ONLY)

Press RETURN to get started!

%LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed state to down

*Mar 1 00:00:06: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up

*Mar 1 00:00:06: %LINK-3-UPDOWN: Interface Serial0, changed state to down

*Mar 1 00:00:06: %LINK-3-UPDOWN: Interface Serial1, changed state to down

*Mar 1 00:00:09: %SYS-5-CONFIG_I: Configured from memory by console

*Mar 1 00:00:09: %SYS-5-RESTART: System restarted --

Cisco Internetwork Operating System Software

IOS (tm) 2500 Software (C2500-I-L), Version 11.2(2), RELEASE SOFTWARE (fc1)

Copyright (c) 1986-1996 by cisco Systems, Inc.

Compiled Wed 13-Nov-96 07:37 by ajchopra

*Mar 1 00:00:09: %LINK-5-CHANGED: Interface Ethernet0, changed state to adminis

tratively down

*Mar 1 00:00:09: %LINK-5-CHANGED: Interface Serial0, changed state to administr

atively down

*Mar 1 00:00:09: %LINK-5-CHANGED: Interface Serial1, changed state to administr

atively down

Thanks

Peter