Hello Experts,
I am in process of configuring a new switch L3 cisco 4948 10ge model and run the following conmands:
Interface VLAN 100
IP address 1.1.1.1/24
Interface VLAN 200
IP address 2.2.2.2/24
Please note there is no interface assigned to the above VLANS and I have created a trunk port which is allowing both 100 and 200 VLAN traffic that port is connected with ESX server but the VLAN status and protocol both in down state. Please suggest what could be an issue?
Thanks
Sent from Cisco Technical Support iPhone App
