Hi every one !
getting error on my switch -
Aug 19 19:50:24: %SFF8472-5-THRESHOLD_VIOLATION: Te2/1/1: Rx power high warning; Operating value: -0.1 dBm, Threshold value: -1.0 dBm. (SW-2)
Aug 19 19:55:05: %SFF8472-5-THRESHOLD_VIOLATION: Te2/1/1: Rx power high warning; Operating value: -0.1 dBm, Threshold value: -1.0 dBm.
Aug 19 20:00:24: %SFF8472-5-THRESHOLD_VIOLATION: Te2/1/1: Rx power high warning; Operating value: -0.1 dBm, Threshold value: -1.0 dBm. (SW-2)
Aug 19 20:05:05: %SFF8472-5-THRESHOLD_VIOLATION: Te2/1/1: Rx power high warning; Operating value: -0.1 dBm, Threshold value: -1.0 dBm.
Aug 19 20:10:24: %SFF8472-5-THRESHOLD_VIOLATION: Te2/1/1: Rx power high warning; Operating value: -0.1 dBm, Threshold value: -1.0 dBm. (SW-2)
Aug 19 20:15:05: %SFF8472-5-THRESHOLD_VIOLATION: Te2/1/1: Rx power high warning; Operating value: -0.1 dBm, Threshold value: -1.0 dBm.
switch -
WS-C3750X-48T-S
IOS -
c3750e-universalk9-mz.122-55.SE6.bin
SW#show int te2/1/1 transceiver detail
ITU Channel not available (Wavelength not available),
Transceiver is internally calibrated.
mA: milliamperes, dBm: decibels (milliwatts), NA or N/A: not applicable.
++ : high alarm, + : high warning, - : low warning, -- : low alarm.
A2D readouts (if they differ), are reported in parentheses.
The threshold values are calibrated.
High Alarm High Warn Low Warn Low Alarm
Temperature Threshold Threshold Threshold Threshold
Port (Celsius) (Celsius) (Celsius) (Celsius) (Celsius)
--------- ------------------ ---------- --------- --------- ---------
Te2/1/1 26.6 75.0 70.0 0.0 -5.0
High Alarm High Warn Low Warn Low Alarm
Voltage Threshold Threshold Threshold Threshold
Port (Volts) (Volts) (Volts) (Volts) (Volts)
--------- --------------- ---------- --------- --------- ---------
Te2/1/1 3.29 3.63 3.46 3.13 2.97
Optical High Alarm High Warn Low Warn Low Alarm
Transmit Power Threshold Threshold Threshold Threshold
Port (dBm) (dBm) (dBm) (dBm) (dBm)
--------- ----------------- ---------- --------- --------- ---------
Te2/1/1 -2.6 1.7 -1.3 -7.3 -11.3
Optical High Alarm High Warn Low Warn Low Alarm
Receive Power Threshold Threshold Threshold Threshold
Port (dBm) (dBm) (dBm) (dBm) (dBm)
------- ----------------- ---------- --------- --------- ---------
Te2/1/1 -2.6 2.0 -1.0 -9.9 -13.9
What could be the issue , is there any workaround .
Thank you .
