10-27-2013 05:45 PM - edited 07-04-2021 01:09 AM
Hi CSC,
Currently we are running 2x 5508 (7.2.111.3) in our Regional DC and all AP's from APAC are connected in H-REAP mode.
On each WLC the following country codes are configured:
Configured Country Code(s):
CN, ID, IN, J2, J3, J4, JP, KE, KR, PH, PH2, TH, TW
Regulatory Domain:
802.11a: -ACEJKNPTU
802.11bg: -ACEJP
We have some sites (mainly China), which facing issues on WLAN recently (slow performance, weak signal..etc.
RF & power level are 'managed' by WLC.
After reviewieing some sites with our vendor, the feedback to improve stability/perfromace, was to either run just 1 country code/WLC..or set RF/power level manually for each AP. (which of course would be an admin nightmare!!)
I havent found the same information on cisco.com & thought connecting AP's from different country's to the same WLC works well (incl. having the WLC manage power/rf)?
Are there any limitations, when having multiple country codes on same WLC?
Appreciate your feedback.
Thanks,
Stefan
Solved! Go to Solution.