12-30-2013 12:11 PM - edited 03-10-2019 09:13 PM
Hello,
I am having trouble copying my ISE 1.2 upgrade files to my local repositories.
Here is a cut and paste from my CLI on one of my ISE nodes after attemtping to copy from my workstation (running an SFTP server) to one of my ISE nodes.
XXX-ise-01/admin# Copy sftp://<My_SFTP_Server_IP_Address>/ise-upgradebundle-1.1.x-to-1.2.0.899.i386.tar.gz. disk:/
Username: Admin
Password:
% ERROR : Backup failed due to one of the following reasons
1. host-key option is not configured
2. host key is removed because of re-image
3. host key is removed from some other repository having same ip/hostname
% Please reconfigure the host-key option
% Error: Transfer failed
I have not configured anything with the "Host-Key" option.
I have googled and searched but can only find limited references to the "Host-key" command within Cisco. I have tried various forms of this on the ISE node with no luck.
I tried an FTP transfer but that did not work.
Any ideas?
Solved! Go to Solution.