01-20-2014 05:48 PM - edited 03-16-2019 09:21 PM
Our SIP trunk provider has a fraud prevention option to use IP authentication for outbound calls.
A prefix is used if you choose to use IP-based authentication for outbound calls.
To use it: you define outbound allowed IP, then prepend the prefix before each call.
Format for NANPA(USA/Canada) calls must be 11-digit.
Example: To call NANPA (USA) - +1 310 555 1234, send the call to "99203947*13105551234@sip.sipprovider.com".
Example: To call International (France) - +33 1 5871 1234, send the call to "99203947*33158711234@sip.sipprovider.com".
We can make outbound calls with no problem, using translation profiles and translation rules.
The issue is, this is a reatil store, and there is some "end-user confusion" when they call an outbound number...and training is...shall we say...hopeless.
If the user dials 95551234. The translation rules will strip the 9, adjust the called number to 99203947*13105551234 and the call goes out with no problem.
The phone displays 99203947*13105551234, and that seems to be the confusion. We want to just not display the translated called number on the 79XX series ephones. Basically, either 95551234, 5551234 or 3105551234. The 10 digit option being the prefered method. Basically, can we strip the 99203947*1 from the display?
I know there is a "Always Display Original Dialed Number" on CUCM. We are using CME 8.6. Is there something that can be done to accomplish the same thing?
Chad