Hi
In a 4507 we activate the IP Base License. The evaluation period is over.
The Switch is up an running.
This partial output of the show version
License Level: ipbase Type: Default. No valid license found.
Next reboot license Level: ipbase
The output of the show license command is
License Store: Primary License Storage
StoreIndex: 0 Feature: lanbase Version: 1.0
License Type: Permanent
License State: Active, Not in Use
License Count: Non-Counted
License Priority: Medium
StoreIndex: 1 Feature: ipbase Version: 1.0
License Type: Evaluation
Evaluation total period: 8 weeks 4 days
Evaluation period left: 0 seconds
License State: Active, Not in Use, EULA accepted
License Count: Non-Counted
License Priority: Low
License Store: Dynamic License Storage
License Store: Primary License Storage
License Store: Dynamic License Storage
StoreIndex: 0 Feature: entservices Version: 1.0
License Type: Evaluation
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
What is the meaning of "Not in use" in License status ?
If the switch is reloaded what will happend? The license LAN base will be in use
Thanks
