I have cisco3750 switch i am trying to make ether channel on that switch below is the configuration i have done on same switch
interface GigabitEthernet1/0/23
switchport mode trunk
speed auto 10 100 1000
duplex full
channel-group 1 mode on
!
interface GigabitEthernet1/0/24
switchport mode trunk
speed auto 10 100 1000
duplex full
channel-group 1 mode on
spanning-tree bpdufilter enable
interface Port-channel1
switchport mode trunk
kindly suggest that configuration is proper or any other configuration is required
second switch is nortel l2 switch, we are creating l2 etherchannel
