03-03-2014 02:56 AM
I've recently updated Cisco Network Assistant to the latest verison - 5.8 (9.1) but I'm seeing something I've never noticed before.
In the Topology view one of my 3750's displays "No IP Address" underneath it, but it does have an IP address set on Vlan245. Admittedly Vlan1 has "no ip address" set but this is the same setup as another 3750 in that community which *does* show the correct IP address!
If I right click the switch with the error and click "Properties" the correct IP address is shown (see below).
I don't know if this may have a bearing on the error but both the 3750's in the topology were previously stacked, though we purposely broke the stacking some time ago.
Also some other things:
Hope someone can suggest something or fix CNA.
Thanks.
Craig