02-24-2014 02:37 AM - edited 03-07-2019 06:23 PM
Hi,
Im abit lost to what the Audit is showing.
When I audit my 2 Wism2 blades from Primeinfrastructure 2 I get ALOT of rows with:
(Type)Configuration Name Audit Status Attribute PI Value Controller Value
(LradIfDot11nDual) 34:a8:4e:4e:e2:10/0/0 Not present in controller - - -
The only thing that is changing between the messages is the mac text after the (Lrad...).
Even if I refresh config from the Wism2 I still have all rows left when doing another audit.
But When I audit my 5 5508 WLC I dont have the missmatch.
Both the Wism2's and 5508 should have the same config.
I can see that the Audit say that its in the PI and missing on the controller, but the value i "-" everywhere so what does it do, where do I enable or disable the setting.
Im dont want to restore PI's values untli I know what it is that Im restoring onto the Wism2.
Any help or insigt to what it is would be gratefully appreciated.
//Anders
Solved! Go to Solution.