08-10-2014 06:06 PM - edited 03-04-2019 11:31 PM
hi Guys,
I am trying to do a "no switchport" on cisco 7609 router but it keeps rejecting the command.
lab01(config-if)#no switchport
Command rejected: not allowed on this interface.
Interface config -
sh run int te2/0/1
Building configuration...
Current configuration : 81 bytes
!
interface TenGigabitEthernet2/0/1
switchport
shutdown
no mls qos trust
end
This was a routed port before but during troubleshooting I configured it to switchport and now I can't seem to take that off
Any help?