We are testing a 3850 stack (active, standby and one member switch) running 3.6.0E. Connecting the console cable to the active switch works fine. When we connect the console cable to either the standby switch or the member switch, the messages "switch console in now available, press return to get started" are displayed. Pressing return simply results in the same messages being repeated without access to the console. Connecting the console cable back to the active switch restores console access. Documentation states that the active console can be accessed via any of the console ports in the stack. Here is the console port configuration:
line con 0
exec-timeout 15 0
media-type rj45 switch 1
media-type rj45 switch 2
media-type rj45 switch 3
logging synchronous
stopbits 1
Is there something else that needs to be enabled for the other console ports to work?
