Dear all; I just stuck on configuring the cisco ATA 187with cme v.9.1. It is not registering at all after configuring as SIP. My configuration is as follows.If there is any further command or step needed, please do let me know.
My configuration is
voice register global
mode cme
source-address 172.16.4.21 port 5060
max-dn 4
max-pool 4
load ATA-187 ATA187.9-2-3-1
authenticate register
tftp-path flash:
file text
create profile sync 0011055035546058
!
voice register dn 1
number 130
!
voice register pool 1
id mac 2834.A2F6.9688
type ATA-187
number 1 dn 1
username ata password ata
codec g711alaw
When I am checking the device URL, I am seeing following log and when I am changing dn values and all, it is effecting over there too.
2000/01/03 07:41:23:170 No CTL installed
2000/01/03 07:41:23:174 IP phone is in non-secure mode
2000/01/03 07:41:23:515 Succeed to get XMLDefault.cnf.xml
2000/01/03 07:41:25:905 File Not Found : CTLSEP34A2F6968801.tlv
2000/01/03 07:41:25:909 No CTL installed
2000/01/03 07:41:25:913 IP phone is in non-secure mode
2000/01/03 07:41:26:265 Succeed to get XMLDefault.cnf.xml
2000/01/03 07:41:28:665 File Not Found : CTLSEP34A2F6968801.tlv
2000/01/03 07:41:28:670 No CTL installed
2000/01/03 07:41:28:674 IP phone is in non-secure mode
2000/01/03 07:41:29:026 Succeed to get XMLDefault.cnf.xml
2000/01/03 07:41:31:425 File Not Found : CTLSEP34A2F6968801.tlv
What might be the issue and the device status is registering.
