Hello Community.
I have a problem with a Catalyst 6500 VSS. I get in Prime all the time a snmp failure, only for this device. SNMP is configured like on all other devices.
Collection Status Failed feature(s)
Failures
Impact
Possible Cause
Unable to collect the Flash and Image related information from the Device. Software image management. SNMP request timed out. Verify device credentials and SNMP response speed from device.
When i start a Report dto check the device credentials, everything is fine and i get no failure.
On the Cat 6500 i get every time when i start a discovery Job or i sync the device an error in the log:
5823: Jul 11 22:02:44: %SNMP-SP-3-INPUT_QFULL_ERR: Packet dropped due to input
queue full
205824: Jul 11 22:02:44: %SNMP-SP-3-INPUT_QFULL_ERR: Packet dropped due to input
queue full
205825: Jul 11 22:02:44: %SNMP-SP-3-INPUT_QFULL_ERR: Packet dropped due to input
queue full
205826: Jul 11 22:02:44: %SNMP-SP-3-INPUT_QFULL_ERR: Packet dropped due to input
queue full
205827: Jul 11 22:02:44: %SNMP-SP-3-INPUT_QFULL_ERR: Packet dropped due to input
queue full
205828: Jul 11 22:02:44: %SNMP-SP-3-INPUT_QFULL_ERR: Packet dropped due to input
queue full
Does anybody know this?
Regards
Stefan