Hi all,
we were assured by a consultant that instead of getting Cisco ASR router we can do BGP routing with 3850 (we only have 2 ISPs connected to our network) but now we have a problem where we can't reach some public IPs from our network when both ISPs are connected, if only one is connected everything is OK. We currenty hold some routing tables on the 3850 (i think around 4000). Since we are stuck now with 3850, can we for example just have 2 routes (to each ISP) without any routing tables so those ISPs handle traffic routing? The crucial part is that we have auto failover to other link if one of the ISP links go down. I am not BGP experts so if question is silly my apologies.
Thanks!
