Hi guys,
Does anyone meet this Radius Error in Cisco ISE 1.2 and the switch 2960 12.2(55)SE7 ?
When i reauthentication the guest profile to the other profile using Radius CoA on the Self-Service Guest Workflow.
The error is :
| Event | 5417 Dynamic Authorization failed |
| Failure Reason | 11103 RADIUS-Client encountered error during processing flow |
| Resolution | Do the following: 1) Verify shared secret matches on the ISE Server and corresponding AAA Client, External AAA Server or External RADIUS Token Server. 2) Check the AAA Client or External Server for hardware problems. 3) Check the network devices that connect the AAA peer to ISE for hardware problems. 4) Check whether the network device or AAA Client has any known RADIUS compatibility issues. |
| Root cause | RADIUS-Client encountered an error during processing flow |
I checked all the resolution steps but the error sitll exsit.
I would greatly appreciate any help you can give me in working this problem
