We recently purchased a few ASR 920's and found that the software rev we are running does not support the use of errdisable commands.
Previously we had used 'no errdisable detect cause link-flap' and 'errdisable recovery cause link-flap', but these commands are now missing.
The only reference to these commands I found are now in interface-service configuration mode. I'm wondering if support for this command in global configuration mode has been dropped entirely, or maybe it is the software rev we are running?
Cisco IOS XE Software, Version 03.14.00.S - Standard Support Release
Cisco IOS Software, ASR920 Software (PPC_LINUX_IOSD-UNIVERSALK9_NPE-M), Version 15.5(1)S, RELEASE SOFTWARE (fc5)
Thank you for any feedback!
Throwing packets since 2012
