We have a 2504 controller running version 7.4.130. Need to create a new WLAN that is NOT put in the default AP group and broadcast on all AP's, but the 2500 is restricted to 16 WLANs, can only use ID's 1 through 16, the first 16 WLAN IDs are automatically put in the default AP Group, and you CANNOT remove them from the default AP group.
All those restrictions sort of tie our hands. Does anyone know if this is addressed in a later version or if there is a work around for this? We really don't want to advertise this SSID from all the AP's associated with the controller.
