06-01-2015 01:27 AM - edited 03-08-2019 12:17 AM
Hi guys
We want to know if we use use this cmd : license boot module c4400 technology-package uck9 disable Can we also enable the license again ?
I cannot find the enable command so i want to verify before disabling the license.
Here i found the disable information : http://www.cisco.com/c/en/us/td/docs/routers/access/sw_activation/SA_on_ISR.html#39121
The CISCO4451 router config guide also does not tell anything.
Thanks for any suggestion,
Edsge