Greetings all,
We're setting up our first SX80 to iron out creases and we've hit a pretty big one, definitely feeling like we're missing something relatively obvious.
We can set the kit up on the network by applying the IPv4 address, subnet and gateway, we can ping it, but then as soon as we trying to do anything through the web interface it disappears off the network.
We can log in to the web interface which is the strange thing, but doing literally anything else makes it drop. We want to try it on Telnet also, but we can't switch it on in NetworkServices without the web interface.
If anyone doesn't have a straight-up answer, the serial link specifications would be useful as well since it would allow us to at least explore and adjust more advanced settings. Can't get any help directly from Cisco since this SX80 doesn't have the necessary support tied to the serial number.
Thanks in advance for any assistance,
Phil
