Hi,
I configured SIP phones with CME and I have inbound and outbound calls working fine. Also call pickup works fine when only local phones are involved.
But when the call comes in via SIP trunk and I try to pick it up within the same pickup group, I get busy tone. The ringing to initial destination stays, but I am not able to pick the call.
I did some debug ccsip messages and what I can see is:
SIP/2.0 484 Address Incomplete
At the same time, call transfer works fine for external inbound calls too.
Did anyone have similar problem? I can also provide more details from the trace, I just didn't want to bother from the start :)
Thanks in advance!
Regards, Dragan
