hi all,
i would like to know if 2911 (or any of its IOS) supports the serial interface command ignore cts.
the 3925 has it but not the 2911. was wondering if it's a platform or IOS limitation.
could someone please advise if this is supported on 2911?
3925#sh ve
Cisco IOS Software, C3900 Software (C3900-UNIVERSALK9-M), Version 15.4(1)T1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Wed 12-Feb-14 06:33 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)
3925 uptime is 41 weeks, 1 day, 20 hours, 22 minutes
System returned to ROM by power-on
System restarted at 06:13:48 UTC Tue Apr 7 2015
System image file is "flash0:c3900-universalk9-mz.SPA.154-1.T1.bin"
Last reload type: Normal Reload
Last reload reason: power-on
3925(config)#int s0/0/0
3925(config-if)#ignore ?
cts DTE ignore cts
dcd DTE ignore dcd
dsr DTE ignore dsr
3925(config-if)#ignore
2911#sh ve
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.4(3)M2, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Fri 06-Feb-15 17:29 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)
2911 uptime is 1 hour, 10 minutes
System returned to ROM by power-on
System image file is "flash0:c2900-universalk9-mz.SPA.154-3.M2.bin"
Last reload type: Normal Reload
Last reload reason: power-on
2911(config)#int s0/2/0
2911(config-if)#ignore ?
dcd ignore dcd
