Hi
I have a simple problem which isn't making much sense, we need to take a video and audio output from an MX800 so that we can record a conference and this is providing to be a more difficult task than expected.
The firmware is TC7.3.4 and we are finding that no matter what we do we are unable to get audio out of HDMI 2 which according to the manual should be supported, we can get audio out of HDMI 1.
The config appears to be correct
*c xConfiguration Audio Output HDMI 2 Level: 0
*c xConfiguration Audio Output HDMI 2 Mode: On
I understand that one of the audio DSP's or maybe multiple will be used for the inbuilt audio on the system, but as the manual states only 1 is used to the other should be available.
Should we expect audio on the HDMI output 2?
Cheers
Dave
Think with Portals
