12-09-2015 01:45 AM - edited 07-05-2021 04:21 AM
Hi, we would like to migrate one wlc to our backup datacenter so we would have one wlc in one DC and the second wlc in the second DC.
(Firmwareversion is 8.0.120.0), I've read that only Layer2 connection between the redundancy ports is necessary so I would assign this ports to a specific vlan.. But on the WLC UI I saw that there is no possibility to edit the RP, so I cannot tag the interface...(as seen in the attached picture)
Is it even necessary to tag this interface on the wlc side?
thanks
Solved! Go to Solution.