04-05-2016 10:09 PM - edited 03-17-2019 06:29 AM
I am not receiving inbound calls with CUCM. I have a call flow of CUCM ->Sip > CUBE -> Sip -> PSTN. Outbound calls are working fine. Inbound calls appear to be not getting past the CUBE.
I'm trying to forward a DID to one DN/phone for now to keep it simple. I've attached the output for the debug ccsip messages command at the CUBE. I'm using a translation pattern on the CUCM to convert the DID to the DN. I've also added the DID number to the DN as an alternate number, but neither of these has enabled inbound calling.
The inbound dial-peer should be fine. Thanks for any help.