06-22-2016 08:57 AM - edited 03-08-2019 06:19 AM
I have inserted a C3850-NM-10G module in a WS-C3850-48T but the ports are not being recognized by the switch.
I obtained this log:
*Jun 21 18:00:31.577: %PLATFORM_PM-6-FRULINK_UNKNOWN_INSERTED: Unsupported FRU module inserted in slot 1
This is the os version of the switch:
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 56 WS-C3850-48T 03.07.03E cat3k_caa-universalk9 INSTALL
2 56 WS-C3850-48T 03.07.03E cat3k_caa-universalk9 INSTALL
It is strange because I also tried with a similar module in a WS-C3850 3.03.05 version and it worked allright.
Thanks for your help!