Dear All,
I have an issue with a LAP: cisco AIR-LAP1242AG-E-K9
Using the IOS: System image file is "flash:/c1240-k9w8-mx.124-25e.JAO6/c1240-k9w8-mx.124-25e.JAO6"
LAP#sh controllers dot11Radio 0 | i reset
Driver TX blocks: in use 0, high 0, at reset 0, fail 0 drop 0
Last radio reset code: 62
Radio resets - total:21 retries:0 failed:0
LAP#sh controllers dot11Radio 1 | i reset
Driver TX blocks: in use 0, high 0, at reset 0, fail 0 drop 0
Last radio reset code: 37
Radio resets - total:17 retries:0 failed:0
LAP#
I have the above issue, and my radio interface keeps bouncing randomly:
| 62 |
RADIO_RC_SET_CHANNEL |
Radio channel set. Reset while setting channel from Control and Provisioning of Wireless Access Points (CAPWAP). |
| 37 |
RADIO_RC_IDB_RESET |
Radio interface reset. |
LAP#sh log | i adio
*Mar 1 00:00:07.471: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:08.930: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1
*Dec 13 00:58:52.268: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Dec 13 00:58:52.268: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Dec 13 00:58:52.504: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Dec 13 00:58:52.504: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to resetlwapp_crypto_init: MIC Present and Parsed Successfully
*Dec 13 00:58:53.268: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Dec 13 00:58:53.268: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Dec 13 00:58:53.809: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Dec 13 00:58:54.809: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Dec 13 00:58:54.848: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Dec 13 00:58:55.847: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Jun 2 07:54:18.816: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Jun 2 07:54:18.818: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Jun 2 07:54:19.792: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Jun 2 07:54:20.058: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Jun 2 07:54:20.062: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Jun 2 07:54:20.067: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Jun 2 07:54:21.185: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Jun 2 07:54:21.185: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Jun 2 07:54:21.330: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Jun 2 07:54:21.339: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Jun 2 07:54:21.344: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Jun 2 07:54:22.403: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Jun 2 07:54:22.403: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Jun 2 07:54:22.438: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Jun 2 07:54:22.444: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Jun 2 07:54:22.449: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Jun 2 07:54:23.494: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Jun 2 07:54:23.495: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Jun 2 07:54:23.728: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Jun 2 07:54:24.801: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Jun 4 12:15:40.633: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Jun 4 12:15:40.635: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Jun 4 12:15:41.632: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Jun 4 12:15:41.658: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Jun 4 12:15:42.658: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
LAP#
I tried to reload the LAP, but had no effect on the fault. I tried to find some more info on cisco forums about the codes or how to remedy them but I could not get anyfurther.
Please let me know if you have any ideas.
Best Regards
