Hello There,
On a WAP131, I am seeing below entries in the log-file, which start being populated roughly 6 hours after a power cycle.
Firmware 1.0.1.4 (latest version)
Time Stamp Severity Service Description
Mar 29,2016 12:00:28 notice miniupnpd[1160] /WANCfg.xml not found, responding ERROR 404
Mar 29,2016 12:00:28 notice miniupnpd[1160] /WANIPCn.xml not found, responding ERROR 404
Mar 29,2016 11:59:34 notice miniupnpd[1160] /WANCfg.xml not found, responding ERROR 404
Mar 29,2016 11:59:34 notice miniupnpd[1160] /WANIPCn.xml not found, responding ERROR 404
Mar 29,2016 11:58:39 notice miniupnpd[1160] /WANCfg.xml not found, responding ERROR 404
Mar 29,2016 11:58:39 notice miniupnpd[1160] /WANIPCn.xml not found, responding ERROR 404
Mar 29,2016 11:57:47 notice miniupnpd[1160] /WANCfg.xml not found, responding ERROR 404
Mar 29,2016 11:57:47 notice miniupnpd[1160] /WANIPCn.xml not found, responding ERROR 404
Mar 29,2016 11:56:53 notice miniupnpd[1160] /WANCfg.xml not found, responding ERROR 404
...
The log file is full with these entries,
The WAP 131 seems to be working fine, only that several times a day the AP seems to be "blackholing". The wireless connection stays up but no data is travelling through. After 1 minute or so, it works again. Tested with Windows 10 laptops, Windows 8 phones, iPads and iPhones, with same unsatisfying result.
The AP is configured with 2 Vlans and connecting to an SG300-28 switch.
I am not sure if both issues are related or separate.
Does anyone have seen these entries and have a solution?
Thanks
