Hi,
We are running version 8.2.100.0 on two WLC 5508 in HA mode. When I enable my syslog server, a lot of theses message arrive periodicaly. Do somebody saw this on their controller ?
It's only on 2.4 band. Not on all AP.
*RRM-CLNT-2_4: May 30 10:23:32.142: %RRM-3-RRM_LOGMSG: [PA]rrmClientProc.c:736 RRM LOG: Airewave Director: Unable to set channel 0[20] on the on AP 84:B8:02:B6:C9:30(0)
*RRM-CLNT-2_4: May 30 10:23:32.142: %RRM-3-RRM_LOGMSG: [PA]rrmChanUtils.c:632 RRM LOG: Attempt to set invalid channel 0 on AP 84:B8:02:B6:C9:30(0)
*RRM-CLNT-2_4: May 30 10:23:32.141: %RRM-3-RRM_LOGMSG: [PA]rrmClientProc.c:736 RRM LOG: Airewave Director: Unable to set channel 0[20] on the on AP 84:B8:02:CD:BC:60(0)
*RRM-CLNT-2_4: May 30 10:23:32.141: %RRM-3-RRM_LOGMSG: [PA]rrmChanUtils.c:632 RRM LOG: Attempt to set invalid channel 0 on AP 84:B8:02:CD:BC:60(0)
*RRM-CLNT-2_4: May 30 10:23:32.141: %RRM-3-RRM_LOGMSG: [PA]rrmClientProc.c:736 RRM LOG: Airewave Director: Unable to set channel 0[20] on the on AP 84:B8:02:CE:59:70(0)
*RRM-CLNT-2_4: May 30 10:23:32.140: %RRM-3-RRM_LOGMSG: [PA]rrmChanUtils.c:632 RRM LOG: Attempt to set invalid channel 0 on AP 84:B8:02:CE:59:70(0)
*RRM-CLNT-2_4: May 30 10:23:32.140: %RRM-3-RRM_LOGMSG: [PA]rrmClientProc.c:736 RRM LOG: Airewave Director: Unable to set channel 0[20] on the on AP 84:B8:02:CE:A8:60(0)
*RRM-CLNT-2_4: May 30 10:23:32.140: %RRM-3-RRM_LOGMSG: [PA]rrmChanUtils.c:632 RRM LOG: Attempt to set invalid channel 0 on AP 84:B8:02:CE:A8:60(0)
*RRM-CLNT-2_4: May 30 10:23:32.139: %RRM-3-RRM_LOGMSG: [PA]rrmClientProc.c:736 RRM LOG: Airewave Director: Unable to set channel 0[20] on the on AP 84:B8:02:CE:AB:A0(0)
*RRM-CLNT-2_4: May 30 10:23:32.139: %RRM-3-RRM_LOGMSG: [PA]rrmChanUtils.c:632 RRM LOG: Attempt to set invalid channel 0 on AP 84:B8:02:CE:AB:A0(0)
*RRM-CLNT-2_4: May 30 10:23:32.139: %RRM-3-RRM_LOGMSG: [PA]rrmClientProc.c:736 RRM LOG: Airewave Director: Unable to set channel 0[20] on the on AP 84:B8:02:D3:28:00(0)
*RRM-CLNT-2_4: May 30 10:23:32.139: %RRM-3-RRM_LOGMSG: [PA]rrmChanUtils.c:632 RRM LOG: Attempt to set invalid channel 0 on AP 84:B8:02:D3:28:00(0)
*RRM-CLNT-2_4: May 30 10:23:32.138: %RRM-3-RRM_LOGMSG: [PA]rrmClientProc.c:736 RRM LOG: Airewave Director: Unable to set channel 0[20] on the on AP 84:B8:02:D3:2E:00(0)
*RRM-CLNT-2_4: May 30 10:23:32.138: %RRM-3-RRM_LOGMSG: [PA]rrmChanUtils.c:632 RRM LOG: Attempt to set invalid channel 0 on AP 84:B8:02:D3:2E:00(0)
*RRM-CLNT-2_4: May 30 10:23:32.137: %RRM-3-RRM_LOGMSG: [PA]rrmClientProc.c:736 RRM LOG: Airewave Director: Unable to set channel 0[20] on the on AP 84:B8:02:D3:4F:A0(0)
*RRM-CLNT-2_4: May 30 10:23:32.137: %RRM-3-RRM_LOGMSG: [PA]rrmChanUtils.c:632 RRM LOG: Attempt to set invalid channel 0 on AP 84:B8:02:D3:4F:A0(0)
*RRM-CLNT-2_4: May 30 10:23:32.131: %RRM-3-RRM_LOGMSG: [PA]rrmClientProc.c:736 RRM LOG: Airewave Director: Unable to set channel 0[20] on the on AP 84:B8:02:DC:70:60(0)
*RRM-CLNT-2_4: May 30 10:23:32.131: %RRM-3-RRM_LOGMSG: [PA]rrmChanUtils.c:632 RRM LOG: Attempt to set invalid channel 0 on AP 84:B8:02:DC:70:60(0)
*RRM-CLNT-2_4: May 30 10:23:32.130: %RRM-3-RRM_LOGMSG: [PA]rrmClientProc.c:736 RRM LOG: Airewave Director: Unable to set channel 0[20] on the on AP 84:B8:02:EB:F0:D0(0)
*RRM-CLNT-2_4: May 30 10:23:32.130: %RRM-3-RRM_LOGMSG: [PA]rrmChanUtils.c:632 RRM LOG: Attempt to set invalid channel 0 on AP 84:B8:02:EB:F0:D0(0)
ETC ...
*RRM-CLNT-2_4: May 30 10:03:10.135: %RRM-3-RRM_LOGMSG: [PA]rrmClientProc.c:736 RRM LOG: Airewave Director: Unable to set channel 0[20] on the on AP 84:B8:02:B6:C9:30(0)
*RRM-CLNT-2_4: May 30 10:03:10.135: %RRM-3-RRM_LOGMSG: [PA]rrmChanUtils.c:632 RRM LOG: Attempt to set invalid channel 0 on AP 84:B8:02:B6:C9:30(0)
thanks !
