We are testing a EoMPLS VC type 5 / Ethernet vc in our lab on VSS setup and not able to pass traffic. The VSS is Sup2T (15 + code) and we have a single AC connected to switch 2 of the VSS.. with switch 1 currently having the active sup in the system. The vc comes up/up like normal all mpls testing end to end looks fine however the pw will not pass traffic.
When we move the ac to a port on switch 1 of the vss all works as expected... the vss has no upstream mec.. rather just dual links up. (one on each chassis).. with the active ip path out switch 1 for the lsp.
In theory we would expect traffic from the AC to come in switch 2 go across the VSL and go out... are we missing something very obvious with mpls and vss ??
thanks!
