Hello,
I have a switch 2960X with a power problem. It looks like two interfaces Gi 1/0/41 and Gi 1/0/42 (upper, lower) goes into power faulty state when Cisco 7911/ 7942 is connected. Log show TStart error on those ports even after 2xmode is applied on that port (I`ve already tried to reboot switch with no luck). I`ve checked it on two IOS:
c2960x-universalk9-mz.152-2.E4
c2960x-universalk9-mz.152-2.E5
error occured after 8-9 months after installation of 2960X switches. I have second switch with similar problem but there is no log and no PoE detection but it look the same, so two neighbour ports are not working with PoE.
Is is some 2960X bug? Anyone had the same issue and have a solution for that maybe?
Thanks in advance.
Marcin.
