I have wlc type 5508 with version 8.3.102.0 and I am setting into a multi-domain, AP I use AP1572 type and status can join, but other types of access points here we use the type ap1552E status as a switch only join when I've upgraded to ios versio C1520K9W8-153.JD, but the status in wlc can not register and keep the download process, I see in consule reveals no such ios, whereas matrix version of the 1552E has support, please help and what can I do
Jan 12 07:19:31.499: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Jan 12 07:19:31.507: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Jan 12 07:19:32.491: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Jan 12 07:19:32.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Jan 12 07:19:32.527: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Jan 12 07:19:33.527: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
examining image...
*Jan 12 07:19:50.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.29.77.225 peer_port: 5246
*Jan 12 07:19:50.331: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.29.77.225 peer_port: 5246
*Jan 12 07:19:50.335: %CAPWAP-5-SENDJOIN: sending Join Request to 172.29.77.225perform archive download capwap:/c1550 tar file
*Jan 12 07:19:50.383: %CAPWAP-6-AP_IMG_DWNLD: Required image not found on AP. Downloading image from Controller.
*Jan 12 07:19:50.387: Loading file /c1550...
ERROR: Image is not a valid IOS image archive.
Download image failed, notify controller!!! From:8.3.102.0 to 0.0.0.0, FailureCode:3
archive download: takes 80 seconds
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Jan 12 07:21:10.387: capwap_image_proc: problem extracting tar file
*Jan 12 07:21:10.387: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 172.29.77.225:5246
*Jan 12 07:21:10.455: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio0 due to hostname change
*Jan 12 07:21:10.455: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio1 due to hostname change
*Jan 12 07:21:10.455: %LWAPP-3-CLIENTERRORLOG: bsnSetCurrentBHRate : fail to set radio control and data rate
*Jan 12 07:21:10.463: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Jan 12 07:21:10.523: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Jan 12 07:21:11.463: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Jan 12 07:21:11.495: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Jan 12 07:21:11.503: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Jan 12 07:21:11.511: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Jan 12 07:21:12.495: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Jan 12 07:21:12.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Jan 12 07:21:12.531: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Jan 12 07:21:13.531: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
examining image...
*Jan 12 07:21:29.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.29.77.225 peer_port: 5246
*Jan 12 07:21:29.331: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.29.77.225 peer_port: 5246
*Jan 12 07:21:29.331: %CAPWAP-5-SENDJOIN: sending Join Request to 172.29.77.225perform archive download capwap:/c1550 tar file
*Jan 12 07:21:29.379: %CAPWAP-6-AP_IMG_DWNLD: Required image not found on AP. Downloading image from Controller.
*Jan 12 07:21:29.383: Loading file /c1550...
(Cisco Controller) >show ap bundle primary
Primary Version : 8.3.102.0
AP Supplement Bundle : Not Installed
Primary AP Image Size Supported AP's
---------------- ---- ------------
ap1g1 12820 AP700
ap1g2 12872 AP1600
ap1g3 14872 AP1530
ap1g4 21068 AP1850/1810
ap3g1 9768 AP3500
ap3g2 14712 AP2600,3600,1700,2700,3700
ap3g3 25252 AP2800,3800
c1140 8668 AP1140
c602i 3864 AP600
(Cisco Controller) >s?
save show
(Cisco Controller) >show boot
Primary Boot Image............................... 8.3.102.0 (default) (active)
Backup Boot Image................................ 8.3.102.0
