Hi,
I am experiencing a peculiar issue:
i have a 2504 running 8.0.120.0. I am trying to get a new 1850 running ap1g4-k9w8-tar.153-3.JD.tar. ver however whenever i try to get it to join to the controller i get a series of messages listed below.
i have tried upgrading and downgading the AP, tried doing a factory reset but none has worked for me so far.
This AP model is supported by controller version newer than 7.0.0.0!
Discovery response from MWAR ''running version 0.0.0.0 is rejected.
Failed to decode discovery response.
CAPWAP SM handler: Failed to process message type 2 state 2.
Failed to handle capwap control message from controller - status 4
Failed to process unencrypted capwap packet from 192.168.1.200
Failed to send capwap message 0 to the state machine. Packet already freed.
wtpProcessPacketFromSocket returned 4
Discovery Response from 192.168.1.200
wcp/RadDrv1 :: Dot11BaseDriver get_vap_if_index ioctl SIOCGIFINDEX failed for apr1v0 error No such device
[*07/29/2016 03:59:10.0181] wcpd: /local/build/JENKINS/workspace/Nightly-Cheetah-corsica-c8_3_throttle-FC3-CCO/base/../elts-meraki/elements/wcp/wcp_db.cc: 1184: void WcpDb::populate_if_index_table(): Assertion `if_index >= 0 && if_index < 64' failed.
[*07/29/2016 03:59:24.3136] ethernet_port wired0, ip 192.168.1.152, netmask 255.255.255.0, gw 192.168.1.1, mtu 1500, bcast 192.168.1.255, dns1 192.168.1.51, dns2 192.168.1.61, domain cgc.co
[*07/29/2016 03:59:37.4096] !!!!! {watchdogd} Process wcpd gone for 60s
this wcpd goes on increasing to 120/180/240 and so on till the AP resets.
Please help.
