We have a fabricpath network configured. For several days, we are seeing our logs filling up with errors from leaf nodes like:
%FWM-6-MAC_MOVE_NOTIFICATION: Host aaaa.bbbb.cccc in vlan x is flapping between gpc1:502 and gpc1:50
- Most of aaaa.bbbb.cccc.dddd is the mac address of the SVI interface for each vlan gateway
- Vlan is the corresponding vlan for the SVI above
- gpc1:502 is the switch ID for the primary VPC peer
- gpc1:50 is the shared switch id
When I run 'show mac add' on each of the switches with the SVI, the primary shows sup-eth2 and the secondary shows 50.0.0
Show VPC shows VPC up with no errors.
I'm not sure where to look next.
