I am seeing PI log in to devices on the network via SSH over and over again with no further action every three minutes. I cannot find the setting that is causing this, nor do I know the reason for it. Any enlightenment would be appreciated.
From router log:
*May 20 18:59:17.013 UTC: %PARSER-5-CFGLOG_LOGGEDCMD: User:Username logged command:!exec: enable
*May 20 19:02:22.142 UTC: %PARSER-5-CFGLOG_LOGGEDCMD: User:Username logged command:!exec: enable
*May 20 19:05:26.989 UTC: %PARSER-5-CFGLOG_LOGGEDCMD: User:Username logged command:!exec: enable
*May 20 19:08:32.188 UTC: %PARSER-5-CFGLOG_LOGGEDCMD: User:Username logged command:!exec: enable
*May 20 19:11:37.396 UTC: %PARSER-5-CFGLOG_LOGGEDCMD: User:Username logged command:!exec: enable
*May 20 19:14:42.722 UTC: %PARSER-5-CFGLOG_LOGGEDCMD: User:Username logged command:!exec: enable
*May 20 19:17:47.247 UTC: %PARSER-5-CFGLOG_LOGGEDCMD: User:Username logged command:!exec: enable
*May 20 19:20:52.231 UTC: %PARSER-5-CFGLOG_LOGGEDCMD: User:Username logged command:!exec: enable
*May 20 19:23:57.515 UTC: %PARSER-5-CFGLOG_LOGGEDCMD: User:Username logged command:!exec: enable
*May 20 19:27:02.437 UTC: %PARSER-5-CFGLOG_LOGGEDCMD: User:Username logged command:!exec: enable
*May 20 19:30:07.513 UTC: %PARSER-5-CFGLOG_LOGGEDCMD: User:Username logged command:!exec: enable
*May 20 19:33:12.511 UTC: %PARSER-5-CFGLOG_LOGGEDCMD: User:Username logged command:!exec: enable
*May 20 19:36:17.524 UTC: %PARSER-5-CFGLOG_LOGGEDCMD: User:Username logged command:!exec: enable
*May 20 19:39:22.553 UTC: %PARSER-5-CFGLOG_LOGGEDCMD: User:Username logged command:!exec: enable
*May 20 19:42:27.872 UTC: %PARSER-5-CFGLOG_LOGGEDCMD: User:Username logged command:!exec: enable
