During an ACI Fabric Upgrade from 1.3 to 2.0 we lost the ability to boot the APICs. Long story short, to maintain CIMC KVM capability we also upgraded the CIMC (CIMC Firmware first and then CIMC BIOS once we determined that that was the reason we were not booting).
Prior to that however we executed the procedure below on one of the APICs (sadly without TAC)
Insieme Fabric Controller (rfs1_version) on /frs1
Insieme Fabric Controller (rfs2_version) on /frs2
Conditions for Recovering or Installing APIC Software Image
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/managing_ACI_fabric_upgrades_and_downgrades/b_Managing_ACI_Fabric_Upgrades_and_Downgrades/b_Managing_ACI_Fabric_Upgrades_and_Downgrades_chapter_011.html#concept_94BCB001E1504030...
Now that one apic does not boot. See the attached image.
Is there a way to complete this recovery?
Thanks!
