09-25-2017 02:38 AM - edited 02-21-2020 06:21 AM
Hi all
I'm experimenting with an FTD in Azure where I'm trying to allow VPN services through the FTD to a server behind the FTD. I should be a basic NAT setup where I allow the VPN services (PPTP and L2TP) from the public IP of the FTD to be passed and translateed to the VPN server.
L2TP is working and I can connect but not PPTP. In ASA there used to be the "inspect PPTP" option to enable this but how would I accomplish this on the FTD?
Regards
Fredrik