I have an ASA (9.6.3) with two interfaces connected to the Internet. The ASA default route is pointing to ISP A and I have PAT and NAT using ISP A working fine. I have a route-map using PBR that sets default next hop for certain clients to ISP B. For the clients using ISP B I also have PAT and NAT setup. PAT works fine and NAT works fine for _outbound_ traffic but I cannot get any inbound services to work.
Test show that it is not a problem with rules or NAT because if I add a static route on the ASA that uses ISP B for a particular Internet IP the inbound works. So I guess I need to add something else for NAT/PBR to work but I am not sure what. Any ideas?
Thanks
Diego
