Hi,
This will be my first time setting up IPv6, so I am doing a test first and I have a query to ask the experts here.
I have enabled ipv6 routing with ipv6 unicast-routing.
I added ipv6 point-to-point ip on the same interface as ipv4, as shown below, and suddenly face with some packet loss.
The packet loss is only affecting ipv4 as there is no ipv6 devices that is sitting behind my routers.
Am I right to say that the packet loss is not due to setting ipv6 on the same interface as ipv4?
interface Vlan5
description TEST_IPv6
ip address x.x.x.2 255.255.255.252
ipv6 address x:x:x:x::2/64
end
Thanks in advance!
