11-28-2017 02:54 AM - edited 03-08-2019 12:54 PM
We have a RV340 router that we can't get to use multiple VPN site-to-site connections, we can only use one at a time if we set the VLAN1 to the same as the ipsec connection.
The different VPN connections have different subnets on our side which we've solved previously by using SNAT + --to-source in iptables.
The old router uses iptables where we simply had a rules like:
-A PREROUTING -d 123.123.123.0/24 -j SNAT --to-source 10.10.10.1
-A PREROUTING -d 123.123.234.0/24 -j SNAT --to-source 10.10.11.1
I can't find how to add these settings in the admin GUI for the router, is it not possible or is it called something else in the "Cisco world"?